IEEE Working Groups
Supported by the PES Materials Subcommittee
Active
- IEEE P43-2000
DRAFT Recommended Practice for Testing Insulation Resistance of Rotating Machinery
Chair: Ian Culbert, ICulbert@IrisPower.com
Secretary: Eric David, Eric.David@etsmtl.ca - IEEE P56
Draft Guide for Insulation Maintenance of Electric Machines
Chair: Douglas Conley, Siemens Power Douglas.Conley@Siemens.com
Secretary: Merideth Stranges GE Consumer & Industrial , Meredith.Stranges@ge.com - P95 IEEE
Recommended practice for Insulation testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage
Chair: Laurent LaMarre, IREQ – HYDRO-QUEBEC - P117 IEEE
DRAFT Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric Machinery
Chair: Nancy Frost, Krempel Insulation Technologies USA, nancy.frost@vonroll.com
Secretary: - IEEE P304-1977
DRAFT Test Procedure for Evaluation and Classification of Insulation Systems for Direct-Current Machines
Chair: Bal Gupta, AOK Technologies, bal.gupta@ieee.org
Secretary: - IEEE P1310-1996
DRAFT Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
Chair: Greg Stone, Iris Power Engineering, Inc. gstone@irispower.com
Secretary: Richard Huber, BC Hydro -
IEEE 1434
Guide for the Measurement of PD in AC Electric Machinery
Chair: Bill McDermid - IEEE P1665
DRAFT Guide for the Rewind of Synchronous Generators, 50 and 60 Hz, rated 1 MVA and above. - Draft 11
Chair: William H. Bartley P.E., william_bartley@hsb.com
Secretary: Jim R. Michalec, jrmichalec@aep.com - IEEE P1719
DRAFT Guide for Evaluating Stator Cores of AC Electric Machines Rated 1 MVA and Higher
Chair: Glenn Mottershead, Voith-Siemens Hydro, gmtrshd@ieee.org
Secretary: Stefano Bomben, stefano.bomben@opg.com - IEEE P1776
Draft Recommended Practice for Thermal Evaluation of Sealed or Unsealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15000 Volts and Below
Chair: Charles Wilson, Insulation Integrity, insxint@suddenlink.net
Secretary: Nancy Frost, Nancy.Frost@vonroll.com -
IEEE
P1799
IEEE P1799
DRAFT Recommended Practice for Quality Control Testing of External Discharges on Form-Wound Coils, Roëbel Bars, Vacuum Pressure Impregnated Stator Insulation and Fully Assembled Stator Windings
Chair: Remi Tremblay, ing.
Approve new PAR until December 2012 It will be a pleasure to see you in June in Montreal and to work with you on this project until December 2012.