IEEE Master Blue Logo gif format"

 Central North Carolina Section

CNC Home

IEEE Central North Carolina ED/MTT/SSC Joint Society Chapter

Electron Devices Society Microwave Theory and Techniques Society  |  Solid-State Circuits Society


IEEE  Central North Carolina ED_MTT_SSC Joint Society Chapter Seminar Series  

Unless otherwise advised all seminar series will be held at:

Analog Device's building II, (Forsyth conference room) 
7736 McCloud Rd Suite 100
Greensboro, NC 27409
   Interactive Map

Contact: Tony Ivanov TIvanov@rfmd.com 336-678-7906

ED_MTT_SSC Joint Society Chapter Officers elected July 13, 2005
        Chair: Tony Ivanov
        Vice Chair: Mike Hughes
        Secretary:  Numan Dogan


Date -  Feb 13, 2006 1/20/06
Time - 6:00 - 7:00 pm
Speaker - Jim Rautio.
Talk - The life of James Clerk Maxwell

Abstract
James Clerk Maxwell stands shoulder to shoulder with
Newton and Einstein, yet even those of us who have spent
decades working with Maxwell's equations are almost totally
unfamiliar with his life and times. This presentation, from the
viewpoint of a microwave engineer, draws on many sources
in providing an understanding of James Maxwell himself.
What was Maxwell like as an infant? What was the tragedy
at eight years old that profoundly influenced his life? What
unique means of transportation did young Maxwell use to
escape a cruel tutor? What memorable event occurred on
his first day of school? When did he publish his first papers,
and what were they about? What did Maxwell have to do
with the rings of Saturn? Why did he lose his job as a
professor? Why did he have a hard time getting another job?
What was his wife like? What is Maxwell's legacy to us? The
answers to these questions provide insight into Maxwell the
person and add an extra dimension to those four simple
equations we have studied ever since.
James C. Rautio, AJ3K
IEEE MTT Distinguished Lecturer

James C. Rautio received a BSEE from Cornell in 1978, a MS Systems
Engineering from University of Pennsylvania in 1982, and a Ph. D. in electrical
engineering from Syracuse University in 1986. From 1978 to 1986, he worked
for General Electric, first at the Valley Forge Space Division, then at the
Syracuse Electronics Laboratory. At this time he developed microwave design
and measurement software, and designed microwave circuits on Alumina and on
GaAs. From 1986 to 1988, he was a visiting professor at Syracuse University
and at Cornell. In 1988 he went full time with Sonnet Software, a company he
had founded in 1983. In 1995, Sonnet was listed on the Inc. 500 list of the
fastest growing privately held US companies, the first microwave software
company ever to be so listed. Today, Sonnet is the leading vendor of 3-D planar
high frequency electromagnetic analysis software. Dr. Rautio was elected a
fellow of the IEEE in 2000 and received the IEEE MTT Microwave Application
Award in 2001 and is an adjunct professor at Syracuse University.

As usual, pizza and refreshments will be provided. 

Contact: Tony Ivanov TIvanov@rfmd.com 336-678-7906


Date - Nov 21, 2005 
Time - 6:00 - 7:00 pm
Speaker - 
Dr. Paul Ampadu, University of Rochester  <<Dr. Ampadu Bio>>
Talk -
Nov 21, 2005: Ultra-low Voltage Design Techniques for Nanoscale Silicon CMOS

Abstract
Because of the quadratic relationship between power and voltage, supply voltage reduction has
become an important method for reducing active power in VLSI systems, improving reliability in
highly scaled MOSFETs, and minimizing the effects of heat dissipation in high-performance systems.
As silicon CMOS is scaled beyond the 90 nm and 65nm to the 32 nm and 22 nm technology nodes,
ultra-low supply voltage becomes one of the most critical and powerful mechanisms for improving
device reliability and energy efficiency. Unfortunately, ultra-low voltage operation has been limited by
performance constraints and other challenges. This presentation evaluates the current state of low voltage
VLSI design, provides techniques for maintaining acceptable throughputs at these sub-volt supplies, and
suggests noise tolerant techniques to mitigate the reduced voltage margins. Trends and
prospects for
ultra-low voltage VLSI in nanoscale CMOS are discussed.


As usual, pizza and refreshments will be provided. 

Contact: Tony Ivanov TIvanov@rfmd.com 336-678-7906


Date - Oct. 24, 2005 (Monday) 
Time - 6:00 - 7:00 pm
Speaker -Dr. Yuhua Cheng, Siliconlinx, Inc.   <<DrYuhuaCheng_Bio>>

Talk - The Influence and Modeling of Process Variation and Device Mismatch for Analog/RF Circuit Design   PDF  10/28/05

This talk will review the influence of local process variation and device mismatch to the electrical characteristics of resistors, capacitors, and MOSFETs. The discussion is mainly focus on the device mismatch as it becomes more and more important in analog design utilizing modern CMOS technology. The models to describe the mismatch behavior are also discussed. To reduce the design circle and help improving the circuit yields, physical and accurate statistical modeling approach is needed to predict correctly the circuit behavior with the consideration of local process variation and device mismatch. As an example, an advanced statistical model based on totally independent process variables is presented. It can predict the measured data well at different bias conditions for devices with wide geometries.


Date - Sept. 15, 2005
Speaker -Dr. Juin J. Liou, University of Central Florida,   <<JJLiou_Bio>>
Talk - On-chip Spiral Inductors for RF Applications, <<Inductors.ppt>>
 


IEEE Small Blue Logo gif format

 [ About ] [ News & Info ] [ Visitor's Centre ] [ IEEE Links ] [ IEEE Store ]  
[ Search ]
[ Online Pubs ] [Central Section Home] [IEEE National]

IEEE Small Blue Logo gif format
Author: Chip Dawson (c.t.dawson@ieee.org)
Web Master: Lonnie Baxley (lhbaxley@ieee.org)
URL: http://www.ewh.ieee.org/r3/cnc 
(Modified:07/05/01)
Copyright 2001, The Institute of Electrical and Electronics Engineers, Inc.