Job Opportunities
Provided for your benefit and interest.
Inclusion of a link on this page does not indicate IEEE support with the obvious
exception of links to other IEEE sites
|
|
|
|
As an SSD Firmware
Development Engineer at this international corporation, you will develop
high-performance controller firmware for Solid State Drives
based on NAND Flash memory products. In this position, you will assist in
evaluating, designing, and building firmware for new high-performance mass
storage controllers that will optimize performance, endurance and reliability
for the target markets. You can expect to work closely with fellow firmware
engineers, system hardware design engineers, product engineers, Flash memory
design engineers, and production engineers to solve cross-functional design
issues. Responsibilities for this
position include development of structured source code targeting the
embedded environment associated with Solid State Drives. Additionally, you
will verify design using a variety of verification methods, including
simulation, FPGA prototyping, and product testing. Your focus will also be on
firmware quality in the system and the target application. As needed, you
will develop new test tools and methods. Using analysis equipment or
software, you will demonstrate the effective analysis of functional or
performance issues with the firmware and hardware in test environments or
target host systems. |
|
|
|
|
|
|
|
|
Successful candidates for
this position will have:
Education: MS or BS in Electrical
Engineering or Computer Engineering is required All qualified
Candidates please e-mail your current word doc. resume to You will be called back for a preliminary
interview within 24 hours including weekends. |
|
________________________________________________________
As a
Product Engineer at this international Corporation within the SSD product
group, you will be responsible for taking solid state drives from design to
high volume manufacturing. This will involve circuit design & debug,
firmware validation, compliance testing, performance characterization and
customer support. You will also be responsible for improving performance,
improving testability, and identifying NAND ( flash
Memory) reliability issues. Other areas
of responsibility include electrical and physical failure analysis,
implementation of new device qualifications, characterization development, and
yield evaluation/improvement. You may modify and/or develop test programs and
firmware microcode. This role may present
future opportunities for Product Leader or Group Leader positions.
Qualifications
Successful
candidates for this position will have:
- 3 or more years of embedded
system Engineering experience with an emphasis on storage interfaces (preferred).
- The ability to drive
engineering efforts through all aspects of new product development and
system level debug.
- Programming experience in C,
PERL, and JAVA.
- Familiarity with Windows, Linux
and Mac OS.
- A thorough understanding of
NAND and DRAM operation.
- Experience using the following
tools: PC based benchmarking tools, logic analyzers, bus analyzers, Digital
Scopes, NextTest test platforms, or other ATE (a
plus).
- Experience with various device
evaluation platforms and other bench tools.
- Good communication, leadership,
problem solving skills, and the ability to work in a team environment.
- Knowledge of storage interface
standards such as USB, SATA, SAS, PCIe, and Fibre Channel.
- Microcontroller knowledge, ARM
9 or equivalent
- The ability to work and maintain
good relationships with world wide controller suppliers.
- Some knowledge of error
detection/correction algorithms.
- Knowledge of various memory
technologies including nonvolatile and DRAM with emphasis on NAND flash.
- Some understanding of microcontroller
firmware.
Education:
Minimum of a BS in Electrical/Computer Engineering or related discipline
and experience.
Qualified Candidates, please contact Rose Marie Studer at
rmstuder@comcast.net ASAP with a current copy of your resume .
You will be called back regarding a preliminary
interview within 24hours.
________________________________________________________
The following were posted at the request of Kathleen Conners. If anyone has questions about these then contact her at:
(719)576-7660 office
(719)338-3862 cell
(719)576-1238 fax
Information also available at www.peoplehirepeople.com
________________________________________________________
EE
Design Engineer -
Senior Electrical engineer working as member of a small engineering
department responsible for design, prototyping, testing and taking a
complete Electrical System to production. Someone with a strong
theoretically background and the ability to apply that knowledge into a
practical design. Experienced with power circuit design principles,
thermal
and temperature implications, PWM control, circuit board layout, and EMC
considerations in the design of both digital and analog micro-controller
based systems. Must have hands-on experience with electronic
troubleshooting. Someone experienced in taking lead role in all aspects of
design and testing of all components of a system. Able to mentor Jr.
Engineers and work with technicians. Generate efficient, cost conscious
designs based on readily available components
Someone who is comfortable with all aspects of the design and development
process and either completes all tasks themselves or finds out who will be
making that part happen and follow-up to make sure it does. Design and
implement circuitry. The control circuitry is designed using Microchip's PIC
family of microcontrollers. The majority of the circuitry uses CMOS logic
devices with some analog interfacing. Implemented 1-Wire networks to
communicate status of various components needed for proper sign operation.
Interface with mechanical and software engineering groups to insure all the
requirements in the customer specifications are being achieved. Provide
production support at all levels to insure the final product meets and or
exceeds the customer's expectations. Write documentation explaining the
operations and maintenance of the products being manufactured.
_______________________________________________________
Job Title: UI Software Developer
Engineer - Colorado Springs
Functional Description
As a member of the software engineering team, you will
apply basic to intermediate knowledge of software architecture to
perform software development tasks associated with developing,
debugging or designing J2EE applications according to provided
design specifications. Build enhancements within an existing
software architecture and periodically suggest improvements to the
architecture. The focus of this position will be in the User
Interface area.
Candidate Requirements BS or MS in Computer Science, Software
Engineering or Electrical / Electronic Engineering with at least a
3.25 GPA. One or more years of experience in object-oriented
software design and implementation, with solid hands on object-
oriented development experience
Able to demonstrate deep knowledge in the following:
Java Swing
J2EE (JSP, EJB, Servlets, JDBC)
XML (XSD, XSLT)
Unix/Linux and Windows
Able to demonstrate basic familiarity in the following:
Understanding of NetBeans
SOAP
LDAP
TCP/IP Networking
Internetworking Operating Systems (Cisco, Juniper, et al)
BEA Weblogic Server
ANT
JUNIT
Principal Accountabilities
The principal aim of the engineering team is to
produce high-quality, well-tested solutions which can be delivered
to our customers on time. In order to achieve this, the company's
Software Engineers are expected to:
. Assist with production of software components for the company's
product set, working on all stages of the software lifecycle
including requirements capture, design, implementation, testing and
support. Ensure that all assigned project tasks are completed
successfully, in order to help achieve the overall project goals.
. Provide accurate and timely reports on progress to the team leader
and project manager as required.
. Work with the rest of the engineering team across all of
company global sites so that the overall project goals can be
achieved.
. Ensure that communications with the rest of the company's R&D
team are effective, timely and open.
. Work with Product Management, Sales, Support and other teams to
capture, analyze and agree requirements.
. Interact with company customers as and when required, ensuring
that a professional image is maintained and customer expectations
are met.
. Enhance their own skills as a software engineer, especially in the
areas of general software development principles, object oriented
design, Java and J2EE, and any new development languages or
techniques which may be required.
. At all times work to the company's software development Quality
Management System, following all processes and ensuring that quality
records are maintained as required.
IT Support Professional Colorado Springs (duties include, but are not
limited to:
* Working on "Helpdesk" trouble tickets to resolve end user issues
* Installation and maintenance of desktop and server systems
* Identifying new solutions to increase productivity of the employees
and / or reduce expenses
* Documenting IT processes
RESPONSIBILITIES:
* End user support of MS Office and other proprietary business
applications
* Knowledge of TCP/IP, DNS, WINS, DHCP
* Hardware troubleshooting of PC systems, laptops and printers
* Network cabling, Switch, Router, Firewall configuration - direct
minor installation, maintenance, troubleshooting, cable creation
* Network and OS (Win 2000 and XP, 2003 server) related
troubleshooting
* Direct experience with Windows Active Directory
* Knowledge in Telephony Infrastructure, Cisco VOIP, Cisco Unity
* Able to train users on basic computer usage
* Able to troubleshoot remotely with or without user present
* Monitor performance and availability of systems with active and
manual tools and processes
ADDITIONAL DUTIES:
* Evening and weekend preventive maintenance activities
* Occasional Emergency on-call activities
REQUIRED COMPETENCIES:
* Experience with multiple operating systems, including Windows 2000,
XP
* Experience with Microsoft Office 2000, 2003 Microsoft Project,
Visio, Symantec Antivirus Corporate edition, and other desktop applications
* Good oral and written communication skills
* Must be organized, highly efficient, and have ability to work
independently and manage well in a multi-tasking environment
* Ability to perform some amount of physical work, e.g. moving and
lifting of computer equipment
* Strong problem solving and interpersonal skills
* Team-oriented attitude
OPTIONAL COMPETENCIES:
* Exchange 2003, Linux, SAN-RaD
* Experience with multi-site support
* A+ certification helpful
EDUCATION & EXPERIENCE:
* 1-2 years minimum demonstrated experience in a Desktop Support role
with Networking Support environment
* 1-2 years experience working in a modern Microsoft systems
environment
* BS/BA from a reputable college / university
___________________________________________________________
Regional Sales Engineer based out
of Colorado Springs for the Western
Region- (PChy)
The Sales position requires a minimum of: four years of technical sales /
sales management experience. (A bag carrier) Must possess significant
experience and be highly proficient in the following: prospecting, selling
solutions, account management and follow through on the sales process. The
successful candidate must have a successful track record exceeding sales
targets, winning new business and negotiating contracts.
The candidate must be a team player, detail oriented, consultative in
selling style and very proficient in technical and economic selling skills.
Sales to State, Cities, Municipalities and Toll authorities.
Engineering background with electrical
and mechanical experience is a must.
Must have a high attention to detail, excellent technical writing and
communication skills, and extensive knowledge of Excel and other Microsoft
office applications. Must be able to interpret specifications, assist in
solutions, interface with engineers, understanding of micro controllers,
electrical & mechanical standards. Will be in home office when not
traveling. Travel 50%. Excellent typing skills and being a team player are
also required. Experience working with government specifications is a plus.
An engineering degree or other technical degree is desired. At plan
140-150K
|
IEEE Job Sites |
|
National Job Sites |
|
|
|
Society
for Technical Communication |
|
Local Job Hunt Support |
|
Local Company Job Sites |