Comparación de Patrones Eléctricos en Tensión Continua Mediante un Divisor 10:1
(Comparison of DC Voltage Standards using a 10:1 divider)
Heriguati de Souza (hdesouza@ute.com.uy), Daniel Slomovitz (d.slomovitz@ieee.org)
UTE ‑ Laboratorio, Montevideo, Uruguay
This paper appears in: Revista IEEE América Latina
Publication Date: May 2006
Volume: 4, Issue: 3
ISSN: 15480992
Abstract:
A selfcalibrated resistive divider to relate 1 V and 10 V levels of DC voltage standards (standard cells, Zener sources, Josephson systems) is presented. The system is based on a divider formed by ten equal resistors, in which the voltage drop on each resistor is measured as well as the total voltage drop. The ratio between the total voltage drop and the average voltage drop on each resistor is, theoretically, 10:1. This measuring system only requires of the divider and a multimeter of 8½ digits as auxiliary equipment. The measurement uncertainty, using this divider, is in the order of 1´107.
Index Terms:
Resistive Divider, Josephson, Zener, Standard Cell
Documents that cite this
document
This function is not implemented yet.
[PDF FullText (200)]
