Diagnóstico de Isoladores de Rede Convencional por Meio da Análise por LabVIEW da FFT do Sinal Gerado a Partir do Detector de Ultrassom
(Diagnostic of Insulators of Conventional Grid Through LabVIEW Analysis of FFT Signal Generated from Ultrasound Detector)
Stéfano Frizzo Stefenon (firstname.lastname@example.org)1, Joaquim Rodrigo de Oliveira (email@example.com)2, Antônio Sérgio Coelho (firstname.lastname@example.org)2, Luiz Henrique Meyer (email@example.com)3
1Universidade do Planalto Catarinense (UNIPLAC)2Universidade Federal de Santa Catarina (UFSC)3Universidade Regional de Blumenau (FURB)
This paper appears in: Revista IEEE América Latina
Publication Date: May 2017
Volume: 15, Issue: 5
This article is intended to present an evaluation on the automation capability in the analysis of insulators of conventional grid by processing the signals generated by ultrasound detectors. The insulators analyzed were removed from the electrical system in various conditions, as well as new insulators. The methodology adopted was a practical analysis of qualitative and quantitative way. The audible noise generated by the output of ultrasound equipment is connected to a personal computer to obtain the FFT signal through LabVIEW software. The characteristic of the FFT signal is used to classify inspected components online, allowing for quick and precise procedure, as shown in the results obtained in this study.
Inspection of electrical systems, Electrical fault, Ultrasound in electrical inspections
Documents that cite this
This function is not implemented yet.
[PDF Full-Text (542)]