| Joint 22nd International Conference & 50th
IEEE Holm Conference on Electrical Contacts - Technical Program Status (Jan
2004) |
|
|
|
| The following
abstracts have been accepted and the papers will be reviewed for final
acceptance. |
|
| |
Title |
Salutation |
First
Name |
Last
Name |
Review
Coordinator |
CPMT
Review? |
Paper
received? |
|
| 01 |
Electrical
Conduction Through Small Contact Spots |
|
R.S. |
Timsit |
Bob Malucci |
|
|
|
| 02 |
The
Three-Dimensional Magnetic Analysis for the Contact System of New-Type
Intelligent AC Contactor |
|
Xu |
Zhihong |
Bill Balme |
|
|
|
| 03 |
Micro-arcs
at Make and Brake Contact Processes |
|
Dietrich |
Amft |
Chi Leung |
|
|
|
| 04 |
Temperature,
Humidity and Pressure Measurement on Automotive Connectors |
|
Yu-Zhi (Liza) |
Lam |
Bob Malucci |
|
|
|
| 05 |
In-Situ
Measurement of the Relative Movement of Connector Terminals |
|
Yu-Zhi (Liza) |
Lam |
Pat Lees |
|
|
|
| 06 |
Experimental
Investigation of the Influence of Several Factors on the Interruption
Performance of MCCB with Gas-Driven Arc |
|
Li |
Xingwen |
Xin Zhou |
|
|
|
| 07 |
A
Novel Optical Fiber Measurement System of Arc Motion in Molded Case Circuit
Breakers |
|
Li |
Xingwen |
Xin Zhou |
|
|
|
| 08 |
Fabrication
Research of Silver Copper Oxide Composite Reactive Synthesis |
|
Zhou |
Xiaolong |
Phil Wingert |
|
|
|
| 09 |
The
Effect of the Ni Additions on the Switching Characteristics of the Contacts
Made of the W-Ag Composition Abstract |
|
V.L. |
Kalikhman |
Zhuan-ke Chen |
|
|
|
| 010 |
On
the Arcless Commutation of Currents Higher Than 1 kA |
|
K. |
Niayesh |
John Shea |
|
|
|
| 011 |
Contact
Resistance Analyses by Using Low DC Contact Voltages |
|
Eisuke |
Takano |
Bob Malucci |
|
|
|
| 012 |
Contact
Systems for Use in Reactive Sulfur Gasolines |
|
Ed |
Smith |
Steve Cole |
|
|
|
| 013 |
Investigation
in Electrical Conductivity of Silver Tin Oxide Fabricated by Reactive
Synthesis |
|
CHEN |
Jingchao |
Gerry Witter |
|
|
|
| 014 |
The
Test Data Verifying & Prediction Model of Electrical Contact |
|
Wenhua |
Li |
Dick Moore |
|
|
|
| 015 |
Study
on Testing Instrument & Failure Prediction for Storage Life of
Electromagnetic Relay |
|
Wenhua |
Li |
Thomas Schoepf |
|
|
|
| 016 |
Concerning
Contact Resistance Prediction Model Based on Time Sequence and Distribution
Character |
|
Fang |
Yao |
Dick Moore |
|
|
|
| 017 |
Evaluation
of Low Level Surface Erosion in Automotive Relays Using a Non-Contact Laser
Measurement System |
|
A.P. |
Sumption |
Zhuan-ke Chen |
|
|
|
| 018 |
Replacement
of AgCdO by AgSnO2 in
DC contactors |
|
Franz |
Hauner |
Phil Wingert |
|
|
|
| 019 |
Microstructures
and Interrupting Behaviors of CuCr Contacts Made by P/M Sintering and
Infiltration Processes |
|
SuJia |
Fu |
Paul Slade |
|
|
|
| 020 |
Interference
Fits in High Current Devices |
|
Mario |
Jochim |
Mike Braunovic |
|
|
|
| 021 |
Reliability
Analysis of Electrical Intelligent Protective Relay |
|
Jingying |
Zhao |
Phil Wingert |
|
|
|
| 022 |
Studies
of Contact Area and Distribution of Intrinsically Conducting Polymer
Interface |
|
Jonathan
|
Swingler |
Steve Cole |
|
|
|
| 023 |
Micro-Arcing
and Arc Erosion Minimisation Using Hybrid Switching Devices |
|
Jonathan
|
Swingler |
Chi Leung |
|
|
|
| 024 |
AC
Contactor Making Speed Measuring and Theoretical Analysis |
|
Wenxiong |
Li |
Phil Wingert |
|
|
|
| 025 |
External
Factors Defining Vacuum Arc Mode |
|
Sokolov |
Alexander |
Paul Slade |
|
|
|
| 026 |
The
Process of Arc-Splitting Between Metal Plates in Low-Voltage Arc Chutes |
|
Manfred |
Lindmayer |
John Shea |
|
|
|
| 027 |
Simulation
of the Temporal Behavior of Circuit Breakers and Motor Starters |
|
Hartwig |
Stammberger |
Xin Zhou |
|
|
|
| 028 |
A
New Mixed Organic Layer for High Corrosion Protection of Electric Contacts |
|
Sophie |
Noel |
Brett Rickett |
|
|
|
| 029 |
MEMS
Switches with Metal Alloy Electric Contacts |
|
Ronald A. |
Coutu, Jr. |
Pat Lees |
|
|
|
| 030 |
A
Reliability Study to Evaluate New Compliant Designs Used in High Speed Signal
Applications |
|
Trent |
Do |
Bob Malucci |
|
|
|
| 031 |
The
Temperature Measurement of Power Contacts by Puls Current Load |
|
Eugeniusz |
Walczuk |
Paul Slade |
|
|
|
| 032 |
Service
Performance and Microstructure of Cp-Nb-Cr/Cu-Cd Contact Materials |
|
Y.S. |
Cui |
Gerry Witter |
|
|
|
| 033 |
Study
on Reliability of Alternating Current Contactor |
|
Haitao |
Wang |
Henry Czajkowski |
|
|
|
| 034 |
Application
of Ag-Pd-Mg New Contact Material to Down Sized Relays |
|
Terutaka |
Tamai |
Zhuan-ke Chen |
|
|
|
| 035 |
Influence
of Contact Materials on the Current Transfer Thanks to the Current
Distribution Measurement in a Low-Voltage Breaking Device by Means of a
Magnetic Diagnostics |
|
Denis |
Cajal |
Xin Zhou |
|
|
|
| 036 |
Snap
Domes as a Switching Element in Automotive Applications |
|
Dietmar |
Spath |
Dick Moore |
|
|
|
| 037 |
Optimal
Design of the Conductor Path in Generator Circuit Breakers with Thermal
Models Under Consideration of the Electrical and Thermal Contact Resistances |
|
Mario |
Schenk |
Chi Leung |
|
|
|
| 38 |
Innovative
Coatings for Connectors Regarding the Increasing Demands in Automotive
Applications |
|
Isabell |
Buresch |
Steve Cole |
|
|
|
| 039 |
Experimental
and Analytical Model of Connector Insertion-Extraction Phase |
|
N. |
Benjemaa |
Brett Rickett |
|
|
|
| 040 |
The
Influence of Kinetic Parameters on Failure Mechanisms Caused by Material
Transfer |
|
Alexander
|
Neuhaus |
Thomas Schoepf |
|
|
|
| 041 |
Contact
Welding Influenced by Anode Arc and Cathode Arc, Respectively |
|
Alexander
|
Neuhaus |
Gerry Witter |
|
|
|
| 042 |
The
Problems of Calculation the Arc Switching Time in Contact Switches |
|
Stanislaw |
Kulas |
Bill Balme |
|
|
|
| 043 |
Simulation
of Spring System's Operation Process for Electromagnetic Relay |
|
Ren |
Wanbin |
George Drew |
|
|
|
| 044 |
Deterioration
of Electrical Contacts: Aging Study of Tin Plating on Aluminum |
|
Bella |
Chudnovsky |
Mike Braunovic |
|
|
|
| 045 |
Research
on the Development of a New AgNi-based Contact Material for Contactors with
Small Capacity |
|
Mingzhe |
Rong |
Bill Balme |
|
|
|
| 046 |
Material
Erosion and Welding by Arcing at 42 Volts DC |
|
Laurent |
Doublet |
Zhuan-ke Chen |
|
|
|
| 047 |
Increase
of Lifetime of Electomagnetically Actuated Contactors by Avoiding
Self-Synchronization |
|
Gerd |
Griepentrog |
John Shea |
|
|
|
| 048 |
Advanced
Thermal Simulation of a Circuit Breaker |
|
Peter |
Frei |
Xin Zhou |
|
|
|
| 049 |
Insulation
Displacement Technology as Technically Equivalent and More Cost-Effective
Alternative Compared to Crimping Technology |
|
Stefan
|
Jorgens |
George Drew |
|
|
|
| 050 |
A
Latching MEMS Relay for DC and RF Applications |
|
Vivek |
Argrawal |
Pat Lees |
|
|
|
| 051 |
An
Updated View of the Aluminum Contact Interface |
|
Jesse |
Aronstein |
Mike Braunovic |
|
|
|
| 052 |
A
Study of the Physical Characteristics of Vibration-Induced Fretting Corrosion |
|
George |
Flowers |
George Drew |
|
|
|
| 054 |
Dust
Corrosion |
|
Xue-Yan |
Lin |
Brett Rickett |
|
|
|
| 055 |
A
Study on Transmission Characteristics of Signal Line with Solder-mount on a
PCB |
|
Hiroshi |
Inoue |
Steve Cole |
|
|
|
| 056 |
Relay
Contact of Multi-Electrodes with Timely Controlled Operation for Arc
Discharge Suppression |
|
Yu |
Yonesawa |
Xin Zhou |
|
|
|
| 057 |
A
Study on Flow Characteristics of a Thermal Expansion Circuit Breaker Near the
Current Zero Period |
|
Jong |
Lee |
John Shea |
|
|
|
| 058 |
Thermal
Fatigue in Stationary Aluminum Contacts |
|
Magne |
Runde |
Ed Smith |
|
|
|
| 059 |
Phenomena
Generated by Splitter Plates on Low-Voltage Electric Arc Dynamics |
|
Francis
|
Gary |
Xin Zhou |
|
|
|
| 060 |
Development
of an Electrostatically Actuated MEMS Switching Probe Card |
|
Kenichi |
Katoaka |
Chi Leung |
|
|
|
| 061 |
Contact
Properties of Ni Micro-Springs for MEMS Probe Card |
|
Kenichi |
Katoaka |
Chi Leung |
|
|
|
| 062 |
Structure
and Switching Characteristics of the Contacts Ag-CdO, Produced by the Method
IOAP |
|
V.L. |
Kalikhman |
Gerry Witter |
|
|
|
| 063 |
Observation
of Arc-Emitted Light Between Slowly Opening Electrical Contacts Using a
High-Speed Camera |
|
Junya |
Sekikawa |
Henry Czajkowski |
|
|
|
| 064 |
Evaluation
of the State of Vacuum Interrupters |
|
Andrzej |
Purczynski |
Paul Slade |
|
|
|
| 065 |
Study
of Surface of WC-Ag Contacts After the Arc Switching Operations |
|
K |
Frydman |
Phil Wingert |
|
|
|
| 067 |
Low
Friction and Wear on Non-Lubricated Connector Contact Surfaces |
|
James |
Moran |
Steve Cole |
|
|
|
| 069 |
Investigation
of Contact Impedance of Packaged Metallized Particle Column with Copper Strip
in High Frequency Domains |
|
Noureddine |
Ben Jemaa |
George Drew |
|
|
|
| 070 |
Research
of the Influence of Preparatory Operations on Contact Properties of
Electrochemical Platings |
|
Alexander
|
Khmyl |
Brett Rickett |
|
|
|
| 071 |
Interrelationships
Between Contact Resistance and Mechanical Parameters at the Contact Interface
Under Force Conditions |
|
Simon |
Hardy |
Ed Smith |
|
|
|
| 072 |
Evaluation
of Arcing Damage on Connector for 42V Automotive Power Net |
|
Jean |
Razafiarivelo |
Thomas Schoepf |
|
|
|
| 073 |
Innovative
Connector Technology Realizes Performance, Density and Manufacturing
Simplicity |
|
Jim |
Nadolny |
Pat Lees |
|
|
|
| 074 |
Tunnel
Conduction Consequences in High Frequency Microcontacts; Passive
Intermodulation Effect |
|
Regina |
Kwiatkowski |
Bob Malucci |
|
|
|
| 075 |
High
Contact Resistance Readings on Clean Microwave Mobile Contacts |
|
Regina |
Kwiatkowski |
Brett Rickett |
|
|
|
| 076 |
The
Long-Term Behaviour of High Current Aluminum Joints Affected by Creep of the
Conductor Material |
|
Stephan |
Schoft |
Mike Braunovic |
|
|
|
| 077 |
Monitor
of Electrical Endurance of Circuit Breaker's Contacts |
|
Shaohua
|
Ma |
Dick Moore |
|
|
|
| 078 |
Oxide
Development on Coated Copper Contacts |
|
Michael
|
Reid |
Ed Smith |
|
|
|
| 079 |
Development
of Numerical Analysis Program of Laser Microscope Data |
|
Makoto |
Hasegawa |
George Drew |
|
|
|
| 080 |
Study
of Non-Arcing Electric Contact Device of MEMS Multi-Electrodes |
|
Yu |
Yonesawa |
Ed Smith |
|
|
|
| 081 |
Study
on AuAg8/AgNi15/CuNi20 Micro Contact Profile |
|
Fan |
Jinduo |
George Drew |
|
|
|
| 082 |
Effect
of Fretting in Lead-Free Systems |
|
Milenko |
Braunovic |
Ed Smith |
|
|
|
| 083 |
Formulation
of Intermetallic in Lead-Free Systems |
|
Milenko |
Braunovic |
Dick Moore |
|
|
|
| 084 |
Observation
of Contact Bridge Phenomena at Transient and Steady State |
|
Hiroyuki |
Ishida |
Phil Wingert |
|
|
|
| 085 |
High
Intensity Contact Opening Under DC Voltage |
|
Philippe |
Teste |
Bill Balme |
|
|
|
| 086 |
Research
on the Relationship Between Time Constant and Arc Duration and Arc Energy |
|
Liang |
Huimin |
Chi Leung |
|
|
|
| 087 |
Research
and Application of Testing and Analyzing System of Sealed Relay's Time
Parameters |
|
Liang |
Huimin |
Thomas Schoepf |
|
|
|
| 089 |
Experiment
Simulation of the Influence of Contact Impedance on Digital Signal
Transmission |
|
Chen |
Ya |
Steve Cole |
|
|
|
| 090 |
Performance
Parameters of a Ball Contact System Between Flex-Print Board and PW-Board for
10 Gbps Transfer |
|
Horst |
Nowacki |
Bob Malucci |
|
|
|
| 091 |
Characteristics
of Carbon and Copper Flat Commutators on DC Motor for Automotive Fuel Pump |
|
Koichiro |
Sawa |
Zhuan-ke Chen |
|
|
|
| 092 |
An
Evaluation Method of the Contact Erosion Based on the DC Mode Test of
Electromagnetic Contactor |
|
Koichiro |
Sawa |
Phil Wingert |
|
|
|
| 093 |
Contact
Resistance Characteristics of High Temperature Superconducting Bulk - III |
|
Koichiro |
Sawa |
Zhuan-ke Chen |
|
|
|
| 094 |
Commutation
Process in Generator Circuit Breakers: Close-Operation and Commutation
Failure in the Open-Operation |
|
Thomas |
Schoenemann |
John Shea |
|
|
|
| 095 |
Switching
RF Signals |
|
Werner |
Johler |
Ed Smith |
|
|
|
| 096 |
Green's
Functions Based Analysis of EM Field Diffusion into the Electrode's Pair of
High Speed Sliding Contact at Linear Motion |
|
Volodymyr |
Chemerys |
Mike Braunovic |
|
|
|
| 097 |
Main
Specialties of High Current Sliding Contact in the Railgun Studied by
Mathematic Simulation |
|
Volodymyr |
Chemerys |
John Shea |
|
|
|
| 098 |
Study
on Reliability Test Method and Instrument of Thermal Over-Load Relay |
|
Jingying |
Zhao |
Phil Wingert |
|
|
|
| 099 |
Electoless
Ni-B and Ni-P Coatings with High-Fretting Resistance for Electrical Contact
Applications |
|
Constantine |
Dervos |
Pat Lees |
|
|
|
| 100 |
The
Relationship Between Arc Root Motion and Magnetic Force on Piezo Actuated
Switching Contacts in High Current Low Voltage Switching Devices |
|
Kesorn |
Pechrach |
Henry Czajkowski |
|
|
|
| 101 |
Development
of New Electrical Contacts for High Voltage Applications |
|
Oana |
Visata |
Paul Slade |
|
|
|
| 102 |
Dynamics
of Temperature and Metallic Vapor Pressure at Contact Bouncing in Vacuum
Circuit Breakers |
|
Stanislav |
Kharin |
Paul Slade |
|
|
|
| 103 |
Technology
of Contact Material AgSnO2Bi2O3 the Key to Improvement of Its Physical and
Mechanical Properties |
|
Stanislaw |
Ksiezarek |
Gerry Witter |
|
|
|
| 104 |
Does
an Electronic Circuit Breaker Need Electrical Contacts? |
|
Peter |
Meckler |
Thomas Schoepf |
|
|
|
| 105 |
Simulation
of the Heat Transfer Mechanism in Relays to Improve Contact Reliability at
Freezing Temperatures |
|
Dieter |
Volm |
Dick Moore |
|
|
|
| 106 |
Contact
Material Affect on Post-Current Zero Breakdown Strength |
|
John |
Shea |
Henry Czajkowski |
|
|
|
| 107 |
Contact
Welding at Break |
|
Thomas |
Schoepf |
Chi Leung |
|
|
|
| 109 |
Substitutes
for Environmental Harmful Substances Used in Power Engineering Switching
Devices |
|
Volker |
Behrens |
Dick Moore |
|
|
|
| 110 |
Optimized
Silver/Zinc Oxide Contact Materials as a Substitute for Silver/Cadmium Oxide
in Wiring Applications |
|
Volker
|
Behrens |
Bill Balme |
|
|
|
| 111 |
Welding
Behavior of Several Cadmium Free Contact Material for Relay and Contactor
Applications |
|
Chi |
Leung |
Bill Balme |
|
|
|
| 112 |
Effect
of Short Circuit Current Duration on the Welding of Closed Contacts in Vacuum
in Vacuum |
|
Paul |
Slade |
Chi Leung |
|
|
|
| 113 |
Endurance
Test with Both Resistive and Inductive Loads at 42VDC |
|
Toshiya |
Yamamoto |
Gerry Witter |
|
|
|
| 114 |
The
Influence of Manufacturing Process, Metal Oxide Content, and Additives on the
Switching Behavior of Ag/SnO2 in Relays |
|
Peter |
Braumann |
Henry Czajkowski |
|
|
|
| 115 |
Direct
Comparison of Ag/SnO2 Contact Materials Produced by Different Processing
Methods |
|
Bernd |
Kempf |
Henry Czajkowski |
|
|
|
| 116 |
Contact
Performance as a Function of DC Automotive Load Type |
|
G. |
Witter |
Thomas Schoepf |
|
|
|
| 117 |
Micro-Electro-Mechanical
Relays - Design Concepts and Process Demonstrations |
|
Han |
Lee |
Ed Smith |
|
|
|
| 118 |
Assessment
of Novel Material Concepts for High Voltage Arcing Contacts by Use of Finite
Element Analysis |
|
Arno |
Plankensteiner |
Phil Wingert |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
Reviews
Information: |
|
|
|
|
|
|
|
| |
Bill Balme
[P: 401-568-6401; F: 401-568-6704; email: balme@www-psi.com] |
|
|
|
|
|
|
|
|
Bob Malucci [P:
630-527-4530; F: 630-512-8601; email: bmalucci@molex.com] |
|
|
Brett Rickett [P:
630-527-4530; F: 630-512-8601; email: Brickett@molex.com] |
|
|
Chi Leung [P:
724-733-8332 x223; F: 724-327-1589; email: cleung@amidoduco.com] |
|
|
Dick Moore [P:
617-926-6400 x8236; F: 617-926-6245; email: Richard.Moore@itt.com] |
|
|
Gerald Witter [P:
847-244-6025; F: 847-244-6041; email: Wittergd@aol.com] |
|
|
Henry Czajkowski
[P: 414-382-4625; F: 414-382-2255; email: hvczajkowski@ra.rockwell.com] |
|
|
John Shea [P:
412-494-3067; F: 412-787-6593; email; JohnJShea@eaton.com] |
|
|
Milenko Braunovic [P:
514-354-7942; F: 514-354-9869; email: mbinterface@yahoo.com] |
|
|
Pat Lees [P:
401-333-1700; F: 401-333-2848; email: Philip_Lees@beminc.com] |
|
|
Paul Slade [P:
607-796-3230; F: 607-796-3364; email: PaulGSlade@eaton.com] |
|
|
Phil
Wingert [email: phil.wingert@earthlink.net] |
|
|
|
Stephen Cole [P:
540-552-3011 x331; F: 540-953-1841; email: ColeSR@polysci.com] |
|
|
Thomas Schoepf [P:
810-323-0606; F: 810-323-9797; email: thomas.j.schoepf@delphi.com] |
|
|
Xin Zhou
[P: 414-449-6045; F: 414-449-6332; email: XinZhou@eaton.com] |
|
|
|
Z.K. Chen
[P: 847-244-6025; F: 847-244-6041; email: Chensun@aol.com] |
|
|
|
Ed Smith
[P:860-286-6125; F: 860-286-6136; email: esmith@jmney.com] |
|
|
|
George Drew
[P:330-306-1134, F: 330-306-1096; email: george.drew@delphi.com] |
|
|
|
|
|
|
|
|
|
|
|
|