Treatment of all matters relating to fuses above 1500 Volts AC and 3000 volts DC.
Chairman: John
G. Leach
Vice-President, Engineering
Hi-Tech Fuses, Inc.
jgleach@hi-techfuses.com
Standards
covered by this Subcommittee:
C37.40-2003
"IEEE
Standard Service Conditions and Definitions for
High-Voltage Fuses,
Distribution
Enclosed Single-Pole Air Switches, Fuse Disconnecting
Switches,
and Accessories"
C37.41-2000
"IEEE
Standard Design Tests for High-Voltage Fuses,
Distribution Enclosed
Single-Pole
Air Switches, Fuse Disconnecting Switches, and
Accessories"
C37.42-1996 -
Transferred from NEMA
"Specification
for High-Voltage Expulsion Type Distribution
Class Fuses,
Cutouts,
Fuse Disconnecting Switches and Fuse Links"
C37.43
- New Document - Transferred from NEMA
"Standard
Specifications for High-Voltage Expulsion,
Current-Limiting and
Combination
Type Distribution and Power Class External Fuses, with
Rated
Voltage
from 1 through 38kV, Used for the Protection of Shunt
Capacitors"
C37.45-1981
(R1992) - Transferred from NEMA
"Standard
Specifications for High-Voltage Distribution Class
Enclosed
Single-Pole
Air Switches with Rated Voltages from 1 through
8.3kV"
C37.48-1997
"IEEE
Guide for the Application, Operation, and Maintenance
of High-Voltage
Fuses,
Distribution Enclosed Single-Pole Air Switches, Fuse
Disconnecting
Switches,
and Accessories"
C37.48.1-2002
"IEEE
Guide for the Operation, Classification, Application,
and
Coordination
of Current-Limiting Fuses with Rated Voltages
1-38kV"
C37.53.1-1989
(R1996) - Transferred from NEMA
"Standard
Conformance Test Procedures for High-Voltage
Current-Limiting
Motor-Starter Fuses with Rated Voltages from 1 through 38kV"
For current information on the High Voltage Fuses Subcommittee please see the Minutes of the Meetings (Archives) on the Home Page.
Go back to PES Switchgear Committee Home Page.
Last updated: June
28, 2006